产品目录

产品信息 »  产品目录  » 真空用元件  » 特殊吸盘

特殊吸盘

非接触式吸盘 XT661

    ・实现工件的非接触搬运。
    ・可吸附工件的距离为：10mm
    ・有2种形式可选
    　旋风型：高提升力：最大44Ｎ
    　伯努利型：夹持时的工件振幅：±0.01mm以下
安全注意事项　真空用元件/共通注意事项　扩展品/选型
特定开发品信息　环保认证(RoHS)

产品特点

■Assist in non-contact workpiece transfer.
■Max workpiece suction distance:10 mm
■Cyclone Type:High lift, Low air consumption, Body material: Al

Original groove-channel design allows cyclone effect with
large suction area and even pressure dispersion!

・High lifting force: Max. 44 N （Outer body diameter: ø100）
・Totaled 5 size: ø20/ø40/ø60/ø80/ø100








・Working Principle

Air is discharged in the whirling direction.

・Various workpiece suction methods are available.

・Grease-free
・Can be disassembled and cleaned the inside.

・Made to Order

With urethane pad* (-X207)
* Except ø20
・Mitigation of impacts and prevention of damage during lifting
・No need to install a guide




With multi-port (-X211)
The presence of a workpiece can be
checked by installing a sensor.

■Low Profile Cyclone Type (-X260)

Thickness: 1.8 mm Weight: Approx. 1.3 g*

* Outer body diameter: ø20

・Can be mounted on the end of the robot arm.
・Two sizes (ø20 and ø25) are available.

■Bernoulli Type: Vibration reducing type, Body material: Resin

Original groove-channel design allows the Bernoulli effect with suppressing the amplitude of the workpiece during gripping!
Amplitude of the workpiece during gripping: ±0.01 mm*or less

* Solar battery silicon cell(□125 mm, t = 250 μm)
* In SMC conditions

Size：□120

Size：ø100

How to calculate

Working Principle

Air is discharged radially.

Various workpiece suction methods are available.

・Reduction of rotation load　* No directionality of whirlwind air
・Standardization of multi-port*　* Except ø40
・Grease-free
・Can be disassembled and cleaned the inside.

■Related Products

Go Top