滑块型
电动执行器／薄型滑块型 LEM
-
・薄型、低重心。
滑台高度：28mm(LEMC/H/HT尺寸25的高度)。
・可与多种导轨组合。
・维护性好。
・电机安装位置：可选择上下、左右。
・可安装用于限位确认或中间信号确认的无触点磁性开关。
・控制性可选(控制器)。
执行类似气缸的点至点控制(可中间12点停止)
通过输入数值简单地实现位置设定。
| 导向机构 | 系列 | 行程 （mm） | 可搬运质量 （kg） | 速度 （mm/s） | 丝杠 导程 （mm） |
|---|---|---|---|---|---|
| 基本型 | LEMB | 50～2000 | 6，11 | 最大 1000 | 相当于48 |
| 凸轮随动型 | LEMC | 50～2000 | 10，20 | 最大 1000 | 相当于48 |
| 单直线导轨型 | LEMH | 50～1500 | 10，20 | 最大 2000 | 相当于48 |
| 双直线导轨型 | LEMHT | 100～1500 | 10，20 | 最大 2000 | 相当于48 |
产品特点
■Compact, Low Profile
Table height: 28mm
(For LEMC/H/HT, size 25)
Table height reduced by using belt drive and offset guide.
■Guide mechanism can be selected.
■Selectable controllability (Controller)
- End to end operation similar to an air cylinder (12 intermediate stop positions)
- Easy position setting using numerical inputs
- Mounting interchangeable with the conventional E-MY series
- Can be connected to various types of guide. (Series LEMB)
- Easy maintenance (Series LEMC/H/HT)
The drive unit and the guide unit are separable.
- Motor Placement: Mounting position of the motor is user selectable and can either be on the top, bottom, left, or right of the actuator.
- Solid state auto switch can be mounted for checking the limit and intermediate signal.
■Application Examples
■Programless Type (With Stroke Study) Series LECP2
Stroke end operation similar to an air cylinder is possible.
■Programless Type Series LECP1
No Programming
Capable of setting up an electric actuator operation without using a PC or teaching box.
■Step Data Input Type Series LECP6
Simple Setting to Use Straight Away
●Easy Mode for Simple Setting
If you want to use it right away, select "Easy Mode."
●Normal Mode for Detailed Setting
Select normal mode when detailed setting is required.
- Step data can be set in detail.
- Signals and terminal status can be monitored.
- Parameters can be set.
- JOG and constant rate movement, return to origin, test operation and testing of forced output can be performed.
■Series Variations
