New products

Product Information »  New Products Category

New Products

Actuators

Compact Guide Cylinder ø12, ø16, ø20, ø25, ø32, ø40, ø50　MGPK Series

New

Updated Dec-25

  • Bore sizes ø6, ø8, and ø10 have been added.
    They can also be used as a stopper [New]
  • A type with an air cushion has been added for
    bore sizes ø12 to ø50.
  • Symmetrical port positioning has been standardized.
  • Volume: Max. 28% reduction（538cm3 → 390cm3）
  • Weight: Max. 41% reduction (0.32 kg → 0.19 kg)
  • High rigidity: Optimized configuration allows for compact body with high rigidity
    Plate thickness increased by up to 33%, Higher rigidity
  • Lube-retainer is added to the guide rod.

Standard Air Cylinder (Square Cover)　MB2/MDB2 Series

New

Updated Dec-25

  • Non-rotating Rod Type, Single Rod/Double Rod has been added. [New]
  • 3 times better durability due to the air cushion + rubber bumper structure
  • Allowable kinetic energy: Max. 1.5 times
    Has the same kinetic energy as the existing MB series product which is 1 size larger
  • CO2 emissions (Air consumption) can be reduced by up to 39%.
    CO2 emissions (Air consumption) can be reduced due to downsizing. (Air consumption for one cycle)
  • The overall length, mounting dimensions, and mounting brackets are interchangeable with the existing MB series product.
  • With auto switch （MDB2Series: MDB2, MDB2W, MDB2K, MDB2KW）

Clamp Cylinder with Lock　CLK2 Series

New

Updated Oct-25

  • Maintains a clamped or unclamped state when air supply pressure drops or residual pressure is released
  • Can be locked at any position within the entire stroke Locking is possible at any desired position.
    Able to easily accommodate changes in workpiece thickness
  • Overall length: Max. 7 mm shorter, Weight: Max. 7% lighter
  • Able to maintain an unlocked state
    Assembly and maintenance simplified
  • Various types of auto switches can be mounted.

Solid State Auto Switch/Intrinsic Safety　D-M9BA□-917/-924/-925

Updated Sep-25

  • ATEX, UL/CSA, Japan explosion-proof
  • 2-color indicator (Red, Green)
    The proper operating range can be determined by the color of the light. (Red → Green ←Red)
  • Compatible with material restrictions for secondary battery manufacture

Magnetically Coupled Rodless Cylinder/Direct Mount Type　CY3R Series

Updated Sep-25

  • Improved lubrication
    A Lube-retainer is installed to support lubrication retention on the piston and to ensure a lubrication film.
    (Bore size: ø15 to ø63)
  • Stable operation
    Lengthening of the wear ring on the body side by, 30% at maximum, helps to achieve smooth movement.
  • Improved piping flexibility
    Improved piping flexibility with the addition of a right side centralized piping type
  • The specifications, magnet holding force, and mounting dimensions are the same as those of the existing CY3R series model.

Mechanically Jointed Rodless Cylinder　MY1B Series

Updated Jul-25

  • Load mass: Max. 30% increase, Allowable moment: Max. 30% increase
    * Compared with the existing MY1B
  • Same mounting dimensions as the existing MY1B

Air Servo Cylinder　IN-777

Updated Jul-25

    Produced upon receipt of order
  • Capable of air cylinder multipoint positioning and control
  • Fast response and high positioning repeatability
    Positioning repeatability: ±0.5 mm
  • Easier maintenance due to unitization
  • Built-in self-diagnosis function (LED lamp and signal output)
  • Emergency stop of the piston when the air or power supply is cut
  • Supports 4-20 mA/HART communication as the communication protocol
  • FOUNDATION Fieldbus communication has been added as a communication protocol. [New]

NAAMS Standards Compliant
Power Clamp Cylinder　CKZ5N Series

Updated Jul-25

  • Bore sizes ø80 has been added. [New]
  • A new structure has achieved downsizing.
    Overall length reduced by 49 mm max.
    Depth reduced by 17.3 mm max. (Interchangeable with existing product CKZ3N in terms of installation)
  • Weight reduced by up to 27%
    Aluminum body with greatly reduced weight
  • High clamping force 4000 N (ø63, Arm length: 100 mm, 0.5 MPa)
  • Manual lock release operability has been improved.
  • Spatter-proof construction
    　Fully enclosed structure by means of an aluminum body

Power Clamp Cylinder　CKZ5T Series

Updated Jul-25

  • Bore sizes ø40 and ø80 have been added. [New]
  • Weight reduced by up to 23%
    Aluminum body with greatly reduced weight
  • A new structure has achieved downsizing.
    Overall length reduced by 49 mm max.
    Depth reduced by 17.3 mm max. (Interchangeable with existing product CKZ3T in terms of installation)
  • Weight reduced by up to 23%
    Aluminum body with greatly reduced weight
  • High clamping force 4000 N (ø63, Arm length: 100 mm, 0.5 MPa)
  • Manual lock release operability has been improved.
  • Spatter-proof construction
    Fully enclosed structure by means of an aluminum body

Stainless Steel Cylinder　CM5□ Series

Updated Jun-25

  • External parts made of stainless steel
    Stainless steel is used for the cylinder body, mounting bracket, mounting bolt, and accessories.
  • Compact and lightweight (Compact type)
    Overall length reduced by 21%* (175 mm→139 mm)
    Weight: Max. 50% reduction* (0.75 kg→0.38 kg)
    ∗ Compared with the existing CG5-S series at 32 mm bore and 50 mm stroke
  • 4 times or more life expectancy under the water droplet scattering environment*
    (Improved water-resistant type)
    ∗ Compared to the standard CM2 product series
    Grease for use in food machinery: NSF-H1 certified greases are available.
    Seal material: FKM or NBR are available.

Hygienic Design Cylinder　HYB/HDYB Series

Updated Jun-25

  • A water resistant cylinder configured for easy cleaning
  • Approx. 5 times increase in service life compared to the existing model (SMC ratio)
  • Grease for food processing equipment (NSF-H1 certified) is available.
  • External seal material: Choice of NBR or FKM

Air Cylinder Short Type　CG3/CDG3 Series

Updated Jun-25

  • Overall length Max. 51 mm shorter, Weight Max. 24% lighter (Comparison to CG1)
  • With auto switch (CDG3 series: CDG3)

Air Cylinder　CG1 Series

Updated Jun-25

  • A single acting type/A direct mount type/An end lock type has been added. [New]
  • Improved piping flexibility
  • Cylinder with rod end bracket is standardized.
  • Interchangeable in mounting with the existing model
  • Various mounting bracket options
  • Part numbers for products with a rod end bracket and/or a pivot bracket
    It is not necessary to order a bracket for the applicable cylinder separately.

Solid State Auto Switch UL/CSA Certified　D-M9□-551/918

Updated Apr-25

  • D-M9□-551：UL, CSA certified
    D-M9□-918：UL, CSA certified + Compatible with material restrictions for secondary battery manufacture
  • Dimensions and Specifications: The same as those of the standard (general purpose) D-M9□ auto switch

Stainless Steel Cylinder/Non-adjustable Air Cushion Type　HF2A-CG5 Series

Updated Apr-25

  • Equipment for the Food Manufacturing Industry
  • All stainless steel specifications (External parts: Stainless steel 304)
  • 4 times better durability in environments where it may come into contact with water droplets
  • Non-adjustable air cushion
  • Mounting interchangeability between the stainless steel cylinder, CG5-S series

Wireless Auto Switch　IN574 Series

Updated Apr-25

  • Wireless power supply and communication for a completely wireless system.
  • Cable free
    Zero risk of problems due to wire disconnection
    Zero cable space and wiring work required
    Zero switch failure due to cable deterioration
  • Battery-less (Wireless power supply / Using WPT)
    Zero maintenance for battery replacement
  • In Japan, a radio station license is required to use a power transmitter (WPT station).
    An application fee for opening a station and a radio wave usage fee are required.
  • This product can only be used in countries that comply with Radio Law (Japan, United States, Canada).
    This product cannot be used in non-compliant countries.

ISO Standards (21287) Compact Cylinder　C55/CD55 Series

Updated Feb-25

  • Smooth cylinder (C55Y) has been added. [New]
  • Made of stainless steel (-XC6) has been added. [New]
  • With coil scraper (-XC35) has been added. [New]
  • Auto switch mounting groove: T-slot type (-X1439) has been added. [New]
  • Bore sizes ø12 and ø16 have been added. [New]
    ∗ These are not subject to ISO Standards (21287).
  • ISO Standards (21287)
  • 1.8 times the anti-lateral load capacity
    The allowable lateral load has been improved by changing the material of the bushing. (For ø20)
  • Increased the standard product's maximum stroke limit (to 300 mm)
  • Standardization of the double rod (C55W) type, smooth cylinder (C55Y), simple specials, and made-to-order options
    Change of rod end shape (-XA□)
    Heat-resistant cylinder (–10°C to 150°C) (-XB6)
    Low-speed cylinder (5 to 50 mm/s) (-XB13)

Water Separator for Vacuum　AMJ-D Series

Updated Dec-24

  • Removes water droplets in the vacuum line
    Prevents vacuum equipment failures
  • Weight: Max. 30% reduction (AMJ40-D: 0.42 kg b AMJ4000: 0.6 kg)
  • Water drop removal ratio: 99% or more
  • Better environmental resistance with 2-layer construction
    The bowl is covered with a transparent bowl guard.
    Superior visibility: 360°

Pin Clamp Cylinder Lateral Compact Type　C(L)KQ32-X3445

Updated Dec-24

  • Lateral Compact Type
  • Compact: Overall length: 94 mm shorter (183mm→89mm)∗
  • Lightweight: Weight: 38% reduction (900g→560g)∗
    ∗Compared with the existing product CKQG32-X2081, LOW type, without lock
  • Lock mechanism to prevent the dropping of workpieces during emergency stops
  • Various clamp arm positions and port positions are available.
  • Mountable on 2 surfaces

High Speed/High Frequency Cylinder　CM2/CQ2-X3423

Updated Dec-24

  • Maximum piston speed: 2500mm/s
  • Maximum operating frequency: 15Hz
  • Kinetic energy: 1.5 times (Compared with the standard product)
  • Reduced impact due to revision of cushion structure
  • Reduced weight of moving parts (piston rod, piston, etc.)

Go Top