产品目录

产品信息 »  产品目录  » 产业用通信元件/无线系统  » 产业用通信元件 对应EtherCAT的元件

产业用通信元件 对应EtherCAT的元件

步进电机控制器 JXCE□/9□/P□/D1/L□/M1

    ・对应EtherCAT™、EtherNet/IP™、PROFINET,DeviceNet™
    ・对应2种动作指示方法
     步序号指示运转、数值指示运转
    ・通信线缆可连续配线
    ・对应数值监控
    ・可IO-Link通信
  • 2D CAD
    查看 2D CAD
  • 步进电机控制器 JXCE□/9□/P□/D1/L□/M1
    说明书
    系列 查看搜索结果
    JXCE1(标准规格)
    JXCEF(对应安全规格)
    查看搜索结果
    JXC91(标准规格)
    JXC9F(对应安全规格)
    查看搜索结果
    JXCP1(标准规格)
    JXCPF(对应安全规格)
    查看搜索结果
    JXCD1(标准规格)查看搜索结果
    JXCL1(标准规格)
    JXCLF(对应安全规格)
    JXCM1(标准规格)
  • 步进电机控制器 JXCE□/9□/P□/D1/L□/M1
    自我宣告书
    系列 查看搜索结果
    JXCE1(标准规格)
    JXCEF(对应安全规格)
    JXC91(标准规格)
    JXC9F(对应安全规格)
    查看搜索结果
    JXCP1(标准规格)
    JXCPF(对应安全规格)
    JXCD1(标准规格)
    JXCL1(标准规格)
    JXCLF(对应安全规格)
    JXCM1(标准规格)
系列对应电机电源电压现场总线
JXCE1(标准规格)
JXCEF(对应安全规格)
步进电机
(带编码器 DC24V)
DC24V
±10%
EtherCAT™
JXC91(标准规格)
JXC9F(对应安全规格)
步进电机
(带编码器 DC24V)
DC24V
±10%
EtherNet/IP™
JXCP1(标准规格)
JXCPF(对应安全规格)
步进电机
(带编码器 DC24V)
DC24V
±10%
PROFINET
JXCD1(标准规格)步进电机
(带编码器 DC24V)
DC24V
±10%
DeviceNet™
JXCL1(标准规格)
JXCLF(对应安全规格)
步进电机
(带编码器 DC24V)
DC24V
±10%
IO-Link
JXCM1(标准规格)步进电机
(带编码器 DC24V)
DC24V
±10%
IO-Link

产品特点

■5 types of communication protocols
■Both air and electric systems can be established under the same protocol.
■Two types of operation command

Step no. defined operation: Operate using the preset step data in the controller.
Numerical data defined operation: The actuator operates using values such as position and speed from the PLC.

■Numerical monitoring available

Numerical information, such as the current speed, current position, and alarm codes, can be monitored on the PLC.

■Transition wiring of communication cables

Two communication ports are provided.

* For the DeviceNet™ type, transition wiring is possible using a branch connector.
* 1 to 1 in the case of IO-Link

■IO-Link communication can be performed.

The data storage function eliminates the need for troublesome resetting of step data and parameters when changing over the controller.

●Step data and parameters can be set from the master side.

 Step data and parameters can be set or changed by means of IO-Link communication.

●Data storage function

 When the controller is changed, the parameters and step data for the actuator are automatically set.*1

●4-wire unshielded cables can be used.

*1 The “basic parameter” and the “return to origin parameter” are automatically set as the actuator parameters, and the 3 items of data consisting of No. 0 to 2 are automatically set as the step data.

■System Construction

Go Top