控制器/驱动器
无需编程的控制器（带行程记忆功能） LECP2
| 型号 | 系列 | 对应电机 | 电源电压 | 并联输入输出 输入点数 | 并联输入输出 输出点数 | 定位 模式 点数 |
|---|---|---|---|---|---|---|
| 无需编程型 （带行程记忆功能） | LECP2 | 步进电机 （带编码器DC24V） | DC24V ±10% | 6点 （光耦合绝缘） | 6点 （光耦合绝缘） | 短点2点 中间12点 |
产品特点
■Compact, Low Profile
Table height: 28mm
(For LEMC/H/HT, size 25)
Table height reduced by using belt drive and offset guide.
■Guide mechanism can be selected.
■Selectable controllability (Controller)
- End to end operation similar to an air cylinder (12 intermediate stop positions)
- Easy position setting using numerical inputs
- Mounting interchangeable with the conventional E-MY series
- Can be connected to various types of guide. (Series LEMB)
- Easy maintenance (Series LEMC/H/HT)
The drive unit and the guide unit are separable.
- Motor Placement: Mounting position of the motor is user selectable and can either be on the top, bottom, left, or right of the actuator.
- Solid state auto switch can be mounted for checking the limit and intermediate signal.
■Application Examples
■Programless Type (With Stroke Study) Series LECP2
Stroke end operation similar to an air cylinder is possible.
■Programless Type Series LECP1
No Programming
Capable of setting up an electric actuator operation without using a PC or teaching box.
■Step Data Input Type Series LECP6
Simple Setting to Use Straight Away
●Easy Mode for Simple Setting
If you want to use it right away, select "Easy Mode."
●Normal Mode for Detailed Setting
Select normal mode when detailed setting is required.
- Step data can be set in detail.
- Signals and terminal status can be monitored.
- Parameters can be set.
- JOG and constant rate movement, return to origin, test operation and testing of forced output can be performed.
■Series Variations
