产品目录

产品信息 »  产品目录  » 电动执行器/电缸  » 卡片电缸

卡片电缸

卡片电缸®(zh) LAT3

    ・采用直线电机,使搬运、推送和长度测量系统小型化。
    ・厚度:9mm,质量:130g(行程10mm时)。
    ・最大推力:6N。
    ・重复定位精度:±5μm。
    ・推进测长精度:±10μm。
    ・最高使用频率:500cpm。
系列行程(mm)传感器
(光学式直线
编码器)分辨率
推进
瞬时最大推力
重复
定位
精度
推进
测长
精度
最高速度
LAT3F10, 20, 30, 501.25μm~6N±5μm±10μm400mm/s
LAT3M505μm~6N±20μm±40μm400mm/s
LAT310, 20, 3030μm~6N±90μm±100μm400mm/s

产品特点

Compact and lightweight
・The transportation, pushing and length measurement systems have been miniaturized through the use of a linear motor.
Force/Accuracy/Operating frequency
・Maximum pushing
force: 6N

Pushing a miniature load

・Positioning repeatability:
± 5 μm

Positioning a workpiece

・Pushing measurement
accuracy: ± 10 μm

Parts measurement

・Maximum operating
frequency: 500 cpm

Rejection of non-conforming products, etc.

Maximum stroke 50 mm added New
Maximum load mass doubled New
・0.5 kg → 1 kg
Serial communication Modbus compatible New
Easy programming (Cycle time entry)
Just input 3 parameters:
Positioning time, Target position, Load mass.
New controllers added

|How to Mount

Body Mounting

2 body mounting options

Workpiece Mounting

The table is provided with dowel pin holes for locating the workpiece as standard equipment.

Cable Mounting

The cable connector does not protrude above the actuator.

|Structure and Working Principle

|Start-up time is reduced greatly with a system that is ready-to-use and easy to set up.

The functions described below makes the start-up quick and easy.

 

Function for measuring and differentiation of workpieces

The size of the workpiece can be measured based on the table stopping position by driving the table until it comes into contact with the workpiece. The workpieces can be differentiated or checked for quality using parallel output signals that correspond to preset table position ranges. Furthermore, using the multi-counter makes it possible to display the table position and output up to 31 preset points.

|Application Examples

Examples of positioning applications

Sensor head movement and positioning

Component movement and positioning

Electronic component pick and place

Component supply to tape

Component separation (escapement)

Workpiece alignment


Examples of measurement applications

Measurement of workpiece height

Measurement of glass substrate thickness (multiple points)

Measurement of cable outside diameter

Measurement of tape thickness


Examples of high frequency actuation

Alignment of components on pallet by vibration

Distribution of workpieces


Examples of pushing applications

Pushing of workpieces (soft touch)

Positioning of workpieces

Cutting of resin mold component runners

Tape alignment

Switch inspection

High-density layout

Go Top